50100 Mm T-slotted Aluminum Extrusion Profile
The 50 x 100 mm T-slot aluminum extrusion profile is a rectangular structural profile built around the classic T-slot geometry, a design that lets brackets, nuts and connecting plates clamp directly into the slot instead of requiring welding or drilling. Because the slot runs the full length of the extrusion, assembly points can be placed at almost any position along the profile, which makes the section a practical base for frames, guards, workbenches and machine enclosures.
Aluminum is widely chosen for these profiles because of its favorable strength-to-weight ratio and the ease with which it can be cut, drilled and tapped with common workshop tools. A 50 x 100 mm section sits in the medium-to-heavy range of the T-slot family, so it is often specified where a larger, stiffer beam is needed than the smaller square sections provide, while still remaining light enough to move and reconfigure by hand.
T-slot profiles are frequently used to build modular machine frames, safety guarding, material handling carts, display structures, shelving and laboratory fixtures. The standardized slot and the matching accessories, including corner brackets, T-nuts, end caps and joining plates, allow a structure to be assembled, taken apart and rebuilt as requirements change, without the long-term commitment of a welded frame.
The rectangular 50 x 100 mm form gives a useful balance between bending stiffness in the long axis and a slim footprint in the short axis, which helps when space around a machine or along a wall is limited. The surface is normally supplied in a mill or anodized finish; anodizing adds a protective oxide layer and gives a clean, uniform appearance. Cut ends can be closed with end caps to present a finished edge.
This listing describes a standard T-slot extrusion profile. Available lengths, machining options and finishes can be reviewed against the current production range, and drawings or cut lists can be discussed before an order is placed. If a project calls for a particular alloy, temper or tolerance, these details are best agreed in advance so the supplied profile matches the intended structure.
Whether the goal is a one-off prototype frame or a repeatable series of machine guards, a well-chosen T-slot profile keeps the build flexible. The 50 x 100 mm section is a sensible starting point when a project needs a sturdy beam that can still be worked with hand tools and standard connectors, and it integrates cleanly with the rest of a T-slot accessory system.
50 series T-slot aluminium extrusion profiles can freely connect with each other.
Material & Temper | Aluminum Alloy 6063-T5,6061-T6 |
Surface Treatment | Anodizing, powder coating, electrophoresis, wood grain, polishing, brushing, sandblasting, etc. |
Colour | Silver |
Slot Width | 8.2 mm/10.2 mm |
Weight | 6.08 kg/m /4.50 kg/m |
Mass of Inertia | lx: 191.09 cm4 ly: 51.21 cm4 / lx: 152.61 cm4 ly: 36.17 cm4 |
Section Modulus | zx: 38.22 cm3 zy: 20.48 cm3 / zx: 14.47 cm3 zy: 30.52 cm3 |
T-slot width | 8.2 mm/10.2 mm |
T-slot height | 12.0 mm/12.3mm |
Section size | 50 mm × 100 mm |
Hole | φ10.2 mm |
Thickness of diagonal bar | 1.9 mm |
Wall Thickness | 1.9 mm |
Fabrication | Die designing→Die making →Smelting&alloying →QC→Extruding →Cutting → Heat Treatment→QC→Surface treatment→QC→Packing→ QC→Shipping→After Sale Service |
Deep Processing | Precision cutting/CNC / Punching / Checking / Tapping / Drilling /Milling |
Certification | ISO9001 |
Our company has two departments-technical & producing department and trade department. Specializing in titanium materials and stainless steel products research and development, production and marketing services. We mainly produce and provide standards based on international standards and China's high-quality titanium and stainless steel products---- titanium sheets, titanium rods, titanium tube, titanium wire, titanium foil, titanium standard parts and other non-standard parts titanium, stainless steel tubes, stainless steel wire and other stainless steel products. Company production factory is located in the suburbs, now has a staff of 200 people, plant area of 100000 square meters;Company sales in the export sector, zhangjiagang channel int'l co.,ltd in urban areas, the existing staff 10 to 20 people.We will continue to innovation, sincere communication with all partners, create the biggest value for customers, welcome to contact us.
A. Our company is an integrated set of industry and trade company.
Q. How to ensure the quality of your products?
A. IS09000, client requirements, product standards, strict inspection to control raw material, production process and final
products.
Q. How do you resolve the problem about your products?
A. Person of aging services: For customer complaints commissioner set up a special complaint handling, complaint issues recorded
the first time and find the relevant person in charge of the feedback and resolve. Details check our "Quality
corrective action report".
Q. What is the MOQ?
A. It depends, different products will be different Sample order is acceptable, and some samples can be free.
Q. How long do you need the delivery time?
1)Supply within 5 -10 days (If products are in our stock list).
2)Customized products need to be calculated according to the quantity.
Q.What 's your payment terms?
A. T/T, L/C at sight , Western Union.
Q.How can we get your price ?
A. We need below information to quote for you:
1. Product Name
2. Standard
3. Material Grade (Chemical Composition)
4. Dimension
5. Quantity
6. The Drawing for Special Parts