6061 6063 T6 Aluminum Alloy Tube with CNC Machining, Bending, Drilling, Sealing, Reducing and Tapping

6061 and 6063 aluminum alloy tube from Zhangjiagang Qianneng is extruded, straightened and cut on CNC centres, so each length holds a consistent wall and a straight axis. Buyers specify this aluminum alloy tube for tent poles, telescopic masts, awning frames, scooter and bike parts, handrails and electrical enclosures, where a light but stiff section has to survive repeated assembly. Grade and temper The aluminum alloy tube is produced in 6061 and 6063 (6000 series) and can be supplied in T3 to T8 temper, which covers formed, welded and heat-treated parts. Mill finished, anodized and powder coated surfaces are all available, and the aluminum alloy tube can be anodized in the colour you nominate. Sizes and end work Send us the outer diameter, wall thickness, length and end treatment. Standard runs are 1 m to 12 m with wall thickness of 0.2 mm to 20 mm, and the aluminum alloy tube can leave the line cut, drilled, tapped, sealed, reduced or bent to your drawing. Every aluminum alloy tube is wrapped in protective film before packing, so the surface arrives free of handling scratches. Choosing the right aluminum alloy tube Pick the aluminum alloy tube in 6063 when you need a smooth anodized finish on a visible frame, and pick the aluminum alloy tube in 6061 when the part is machined or welded and needs higher strength. If your project is still at drawing stage, send the drawing and we will confirm whether a standard aluminum alloy tube or a custom extrusion die is the faster route.