6061 6063 Aluminum Round Tube Drawn Aluminum Tubing
Overview
drawn aluminum round tube is a general aluminium product supplied for industrial and project use. Aluminium is chosen where a low weight, corrosion-resistant and non-magnetic material is wanted, and a product of this kind is normally selected against a drawing, a sample or a written specification rather than a fixed catalogue list. The exact alloy, size, temper and finish are usually confirmed with the buyer before an order is placed.
Alloy and material
Aluminium alloys are grouped into series such as 1000, 3000, 5000, 6000 and 7000, and the series affects strength, formability, weldability and corrosion behaviour. Grades such as 6061 and 6063 are common for drawn round tube of this kind. The final alloy is confirmed against the requirements of the application rather than assumed.
Dimensions and tolerances
drawn aluminum round tube can be described by outside diameter, wall thickness, length and straightness, and each of these influences how the part behaves under load and during bending, cutting or assembly. Dimensional tolerance, roundness and straightness matter whenever the product is fitted with connectors or other components. Any critical dimension should be stated clearly when an enquiry is made.
Finish and surface
The surface can be supplied in a plain mill finish or with a treated finish such as anodising or painting, depending on the look and performance required. A clean, even surface is often wanted where the product will be visible or will be further machined, bent, welded or coated. A specific finish is best described in the enquiry.
Tolerances and quality
Because these products are often made to order, tolerances, straightness, roundness and surface condition are agreed with the buyer rather than assumed. Any standard or sample that the parts must meet should be included with the enquiry so that it can be taken into account.
Typical applications
- Frame and structure assemblies
- Machined and fabricated parts
- Display and furniture frames
- General industrial tube work
Ordering and enquiry
Requirements for drawn aluminum round tube vary widely between projects. To review an enquiry accurately, please provide the alloy, temper, dimensions, quantity and surface finish you require, together with any drawing, specification or sample. Our team will confirm how the requested product can be matched to your needs.
twist lock aluminum telescopic pole for fruit collection
aluminium main feature:
High weather resistance anti scratch anticorrosion and good weather resistance subtle edges and elegant appearance and easy processing and installation high brightness and hardness. So it is widely used in aluminum window, door, curtain wall, hand railing, normal aluminum profile, decorative and industrial aluminum profile etc.
Detail Description:
|
Item |
Aluminium pipe/pipes Aluminium Tube/Tubes/tubing |
|
Material |
Aluminium |
|
Grade |
1000 series: 1050,1060,1070,1080,1100,1435, etc 2000 series: 2011,2014,2017,2024, etc 3000 series: 3002,3003,3104,3204,3030, etc 5000 series: 5005,5025,5040,5056,5083, etc 6000 series: 6101,6003,6061,6063,6020,6201,6262,6082, etc 7000 series: 7003,7005,7050,7075, etc |
|
standards |
ASTM, ASME,EN, JIS, DIN,GB/T etc |
|
Size |
Outer Diameter:3-250mm |
|
Wall Thickness: 0.3-50mm |
|
|
Length: 10mm -6000mm |
|
|
Surface treatment |
Mill finish Anodized Electrophoresis Powder coating Wooden grain Sand blast |
|
Surface colors |
Nature, silver, bronze, champagne, black, gloden, etc As customized |
|
Temper |
T3-T8 |
|
Moulding/Pattern
|
|
|
Application
|
1. Lighting,solar reflector plate. 2.architectural appearance, interior decoration:ceiling,metope, furniture,cabinets and so on. 3.elevator,nameplate, bags. 4.automotive interior and exterior decoration. 5. Interior decoration: such as photo frame. 6.household appliances, refrigerator, microwave oven, audio equipment. 7. Aerospace aspects. 8, machinery parts processing, mold manufacturing . 9. chemical/insulation pipeline coating. |
Chemical Composition:
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Zr |
Impurity |
Al |
|
2014 |
0.5-1.2 |
0.7 |
3.9-5.0 |
0.4-1.2 |
0.2-0.8 |
0.1 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
2017 |
0.2-0.8 |
0.7 |
3.5-4.5 |
0.4-1.0 |
0.4-0.8 |
0.1 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
2024 |
0.5 |
0.5 |
3.8-4.9 |
0.3-0.9 |
1.2-1.8 |
0.1 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
5052 |
0.25 |
0.4 |
0.1 |
0.1 |
2.2-2.8 |
0.15-0.35 |
0.1 |
- |
- |
0.15 |
Rest |
|
5056 |
0.3 |
0.4 |
0.1 |
0.05-0.20 |
4.5-5.6 |
0.05-0.20 |
0.1 |
- |
- |
0.15 |
Rest |
|
5083 |
0.4 |
0.4 |
0.1 |
0.40-1.0 |
4.0-4.9 |
0.05-0.25 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
5754 |
0.4 |
0.4 |
0.1 |
0.5 |
2.6-3.6 |
0.3 |
0.2 |
0.15 |
- |
0.15 |
Rest |
|
6061 |
0.4-0.8 |
0.70 |
0.15-0.40 |
0.15 |
0.8-1.2 |
0.04-0.35 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
6063 |
0.2-0.6 |
0.35 |
0.1 |
0.1 |
0.45-0.9 |
0.1 |
0.1 |
0.1 |
- |
0.15 |
Rest |
|
6082 |
0.7-1.3 |
0.5 |
0.1 |
0.4-1.0 |
0.6-1.2 |
0.25 |
0.2 |
0.1 |
- |
0.15 |
Rest |
|
7050 |
0.12 |
0.15 |
2.0-2.6 |
0.1 |
1.9-2.6 |
0.04 |
5.7-6.7 |
0.06 |
0.08-0.15 |
0.15 |
Rest |
|
7075 |
0.4 |
0.5 |
1.2-2.0 |
0.3 |
2.1-2.9 |
0.18-0.28 |
5.1-6.1 |
0.2 |
- |
0.15 |
Rest |
Production Flow
Q. Are you a factory or trading company?
We are a factory company.
Q. How to ensure the quality of your products?
ISO9000, client reqirements, product standards,strict inspection to control raw material,production process and final products
Q. How do you resolve the problem about your products?
Person of aging services: For customer complaints commissioner set up a special complaint handling,complaint issues recorded the first time and find the relevant person in charge of the feedback and resolve. Details check our "Quality corrective action report"
Q. What is the MOQ?
A. Sample order is acceptable, And some samples can be free.
Q. How long do you need the delivery time?
1)Supply within 5-10days (product in our stock list)
2)Custom products need to be calculated according to the quantity
Q.What 's your payment terms?
T/T , L/C at sight , Western Union
Q.How can we get your price ?
We need below information to quote for you:
1. Product Name
2. Standard
3. Material Grade (Chemical Composition)
4. Dimension
5. Quantity
6. The Drawing for Special Parts