Adjustable Tarp Poles Telescoping Aluminum Rods For Tent Fly And Tarps,Lightweight Replacement Tent Poles Awning Poles

A tent pole is one of the basic parts of a camping tent. The pole is made from aluminum alloy in a round profile, and it is used to hold the fabric of the tent so that the shelter keeps its shape when it is pitched. Aluminum alloy is chosen for this kind of part because it is light to carry and easy to handle on site.

The pole is produced in a round section. A round profile is the common shape for tent poles: it is straightforward to produce, it stores easily, and it fits the sleeves and fittings that are normally used with a camping tent. Because the section is round, the pole can be led along the run of the tent in a simple, even way.

Aluminum alloy gives the pole a low weight for its size. That matters for camping equipment, because the poles have to be carried together with the tent, the pegs and the rest of the kit. A light pole helps keep the packed weight of the tent within a comfortable range for walking, cycling or travelling.

Material used in a tent pole is expected to stand up to ordinary outdoor conditions. Aluminum alloy resists the effects of damp air better than plain steel, and its surface can be finished in different ways when a buyer needs a particular appearance or a further level of protection. The alloy can also be supplied in the temper that suits the way the pole will be formed.

Tent poles are made in a range of diameters and lengths so that they can suit different tents and different pitching arrangements. The diameter and the length are chosen together, since both of them affect how the pole behaves in service and how the tent stands once it is put up.

Camping is the main use for this part. The pole is supplied for camping tents and for the outdoor equipment that goes with them. Buyers who need a pole for a particular tent can confirm the diameter, the length and the quantity that their design calls for, and the material can be prepared to that requirement.

Because the section is round and the material is aluminum alloy, the pole can be cut and drilled with normal workshop tools when a shorter or longer length is needed. It can also be joined and fitted with the usual pole hardware. This makes the part convenient for tent makers, repairers and outdoor equipment suppliers who prepare poles to their own sizes.

Orders are produced to the agreed specification. The diameter, the length and the quantity are confirmed before the work starts, and the finished poles are checked against that requirement before they are packed for delivery. Buyers are welcome to ask which options can be produced for the quantity they need.