7075 Aluminum Tent Pole Connector for Outdoor Tent Frame Assembly
Product Overview
This tent pole connector is a small aluminum alloy fitting used to join two sections of an outdoor tent frame. One end of the connector slides into the bore of the first pole and the other end into the second, giving the frame a continuous, aligned joint at the meeting point. It is also used to replace a worn or damaged joint so that an existing frame can be put back into service rather than being discarded.
Material and Construction
The connector is formed from aluminum alloy, a material chosen for its combination of low weight and dependable strength. Because the fitting sits inside the pole rather than on the outside, the outer profile of the frame stays smooth and the fabric of the tent can pass over the joint without catching. Wall thickness is controlled so the connector carries the bending and shear load that passes through the joint without deforming under normal use.
Fitting and Use
Installation is done by hand. The connector is pushed into the open end of a pole until it seats, and the second pole is then slid over the exposed end. Because the fit depends on the inner and outer diameters of the poles, the connector should be matched to the tube size of the frame. No special tools are required, and the fitting can be removed and re-used if the frame is rearranged.
Typical Applications
The connector suits outdoor tent frames, awnings, gazebos, canopy shelters and similar pole-based structures. It is used both in new assembly, where a frame needs a joint between two lengths of tubing, and in repair, where a cracked or bent joint must be replaced. The same fitting also serves camping furniture and light support frames that rely on aluminum tubing.
Matching and Customization
Connectors can be reviewed against a customer pole diameter, wall thickness and required insertion depth. Where a specific size or finish is needed, we can look at the drawing or a sample and confirm a feasible combination before production. Sharing the tube dimensions and the frame it belongs to helps us recommend a suitable connector.
Notes
Performance depends on the pole diameters, the wall thickness of the tubing and the way the joint is loaded in the finished frame. We are glad to answer questions about matching a connector to a particular tent or shelter. Final specifications are confirmed in writing before an order is placed.