Aluminum Adjustable Telescoping Button Lock Pole for Tent Fly Tarps and Camping Shelters

Product Overview

This adjustable telescoping pole is made from aluminum tubing and uses a push-button lock to hold each section at the length you set. It is built for tent fly and tarp setups, where the pole has to stand at a chosen height and stay there while the shelter is pitched and used. The button lock lets the pole be shortened for packing and extended again at camp without tools.

How the Button Lock Works

Inside the joint a spring-loaded button sits in the inner tube and snaps into a hole in the outer tube. Pressing the button releases the section so it can slide, and letting go allows the button to seat in the nearest hole, locking the pole at that length. Because the lock is mechanical and positive, it does not rely on friction alone, which helps on a pole that carries a standing load for hours.

Material and Finish

The pole is formed from aluminum tubing, a material chosen for a good balance of strength and low weight. Aluminum is easy to carry and does not rust, which suits a pole used outdoors and packed away damp. The tube surface is left clean and even so the sections slide freely against one another, and the pole can be wiped down after a trip to keep the joints working smoothly.

Adjustable Telescoping Design

Each section slides inside the next, so a single pole covers a range of working heights instead of one fixed size. This suits tent flys that need a raised entry, tarp ridgelines that change angle with the terrain, and awnings that are set up differently from one camp to the next. When the trip is over, the sections collapse into each other and the pole packs to a short bundle.

Typical Uses

• Tent fly and porch poles that lift an entrance off the ground
• Tarp ridgeline and corner supports for camping shelters
• Awning, sun shade and wind break support poles
• Backpacking shelter poles carried as spares or replacements
• Garden, greenhouse and grow frame supports where adjustability is wanted

Points to Note

• Aluminum tubing construction, light for its strength
• Push-button lock holds the section at the selected length
• Telescoping sections pack down short for transport
• Non-rusting material suited to outdoor and damp conditions
• Intended for tent fly, tarp and shelter support duty

Buying This Pole

Poles in this family are supplied to the length and section count a shelter needs, so buyers should confirm the working height and packed length they require before ordering. If a shelter has an unusual angle or a specific fitting at the base, that can be taken into account when the pole is put together.