Aluminum Profiles For Window And Door Systems Extruded Aluminium Frame Sections
Aluminum Profiles for Window and Door Systems
Aluminum profiles for window and door systems are the extruded frame sections that carry glass, hold hinges and locks, and give an opening its shape. The profiles are made by pushing heated aluminium through a shaped die, so the cross-section stays constant for the whole length of the bar and frames can be cut from the same extrusion run after run. That makes them straightforward to fabricate into window sashes, door leaves, outer frames, transoms and mullions.
Material and Extrusion
Aluminium suits these sections because it is light, stiff for its weight and naturally resistant to corrosion, so a finished frame stays accurate in service without the repainting that steel or timber needs. Extrusion also lets complex details - glazing rebates, screw ports, drainage channels and fixing grooves - be formed in a single pass instead of being machined afterwards. The section therefore arrives ready for cutting, drilling and assembly, which shortens the work on the bench.
Section Shapes and Assembly
A window or door system depends on sections that fit together: outer frames, sashes, transoms and mullions each have their own profile but share the same jointing details. Extruded profiles are mitred at the corners and joined with cleats, corner stakes or brackets, while glazing beads and gaskets are pushed into the same geometry to hold the glass. Because the section is uniform, a fabricator can set one machine and cut a complete window run to size.
Typical Applications
- Window frames, sashes and casement sections
- Door frames, leaves and threshold details
- Mullions, transoms and curtain wall members
- Glazed partitions, shopfronts and balcony enclosures
- Screen frames, insect panels and shutter sections
Fabrication and Finishing
The sections cut cleanly on standard aluminium saw blades and can be drilled, tapped, punched and routed with normal tooling for the material. Corners are usually mitred and crimped or bracketed, and simple butt joints are bolted where an exposed fixing is acceptable. After assembly the frame can be left in its mill finish or given a surface treatment, and the profile geometry stays the same either way, so the hardware and beads still fit the section.
Why Choose These Profiles
For a window or door maker the priorities are a consistent section, workable joints and a finish that lasts. Extruded aluminium profiles deliver all three: bars arrive straight and accurate, the details needed for glazing and hardware are already formed in the profile, and the material does not need ongoing protection against rust. Supplied in standard lengths, they can be cut to suit repeated window and door sizes with very little waste on the bench.
The aluminum window and door profile are made from a material that does not warp or rust, and hence can be used in outdoor settings as well as indoors. Due to the low thermal conductivity, this aluminum profile for mosquito screens, doors, and windows are sustainable and resistant to weather changes. The aluminum profile can be used in a large number of residential, commercial, and industrial applications. These include door and window frames, sliding door sills, and window stiffeners.
Powder Coating
Powder coating is a safe, dry finishing process that uses finely ground particles of pigment and resin to create a protective
finish. We choose to powder coat our steel frames because it is low in toxicity and has low flammability. The powder coating is then evenly melted and cooled into a thin, durable film. Powder coating can maintain its finish for up to 15-20 years, depending on pre-treatment and the type of powder. Its resistance to weather, corrosion, and chemicals makes powder coating a more durable finish than paint or other liquid coatings.
Wood Grain
Ceilings, cladding, curtain walls, and partitions with aluminum wood finish are often seen in commercial buildings. In-home interior decoration, wood-like aluminum doors, and windows are prevalent now, and aluminum furniture cabinets with wood grain color have begun the market. Now you can see many wood colors in garden design, like fencing and gates, decking, house siding, and railing.
Anodizing
Anodizing cannot peel off. The coating is part of the metal. Anodizing gives aluminum a deeper, richer metallic appearance than is possible with organic coatings. This is because an anodized coating is translucent, and one can see the base metal underneath the coating. Anodizing provides a thin aluminum oxide layer, which will deteriorate over time. Depending on the thickness and quality of the anodization, the surface should last 10-20 years.
Material & Temper | Aluminum Alloy 6063-T5 |
Surface Treatment | Anodizing, powder coating, electrophoresis, wood grain, polishing, brushing, sandblasting, etc. |
Colour | Silver,black |
Grade | 6000 series |
Length | Customized |
Application | Decoration |
Brand Name | Channel |
Thickness | Customized |
Lifetime | Anodized for 12-15 years outdoor, powder coating for 18-20 years outdoor. |
New Moulds | Opening new moulds will be taken about 7-10 days |
Fabrication | Die designing→Die making→Smelting&alloying→QC→Extruding→Cutting→ Heat Treatment→QC→Surface treatment→QC→Packing→ QC→Shipping→After Sale Service |
Deep Processing | Precision cutting/CNC / Punching / Checking / Tapping / Drilling /Milling |
Certification | ISO9001 |
Our company has two departments-technical & producing department and trade department. Specializing in titanium materials and stainless steel products research and development, production and marketing services. We mainly produce and provide standards based on international standards and China's high-quality titanium and stainless steel products---- titanium sheets, titanium rods, titanium tube, titanium wire, titanium foil, titanium standard parts and other non-standard parts titanium, stainless steel tubes, stainless steel wire and other stainless steel products. Company production factory is located in the suburbs, now has a staff of 200 people, plant area of 100000 square meters;Company sales in the export sector, zhangjiagang channel int'l co.,ltd in urban areas, the existing staff 10 to 20 people.We will continue to innovation, sincere communication with all partners, create the biggest value for customers, welcome to contact us.
A. Our company is an integrated set of industry and trade company.
Q. How to ensure the quality of your products?
A. IS09000, client requirements, product standards, strict inspection to control raw material, production process and final
products.
Q. How do you resolve the problem about your products?
A. Person of aging services: For customer complaints commissioner set up a special complaint handling, complaint issues recorded
the first time and find the relevant person in charge of the feedback and resolve. Details check our "Quality
corrective action report".
Q. What is the MOQ?
A. It depends, different products will be different Sample order is acceptable, and some samples can be free.
Q. How long do you need the delivery time?
1)Supply within 5 -10 days (If products are in our stock list).
2)Customized products need to be calculated according to the quantity.
Q.What 's your payment terms?
A. T/T, L/C at sight , Western Union.
Q.How can we get your price ?
A. We need below information to quote for you:
1. Product Name
2. Standard
3. Material Grade (Chemical Composition)
4. Dimension
5. Quantity
6. The Drawing for Special Parts