Aluminum Z-shape Profile Custom Z-section Aluminum Extrusion Profile Manufacturer
What this Z shaped profile is
This Z shaped profile is an extruded section of 6063 aluminium alloy in the 6000 series, with a Z form that carries a lip on each side. Every Z shaped profile is made to your drawing, held to a tolerance of ±1 %, and supplied in temper T3 to T8 and T5. The surface is anodized silver, so the Z shaped profile keeps a clean finish indoors and out.
Where this Z shaped profile is used
Buyers fit this Z shaped profile into doors and windows, and it also serves as a trim or a stiffening rail on panels and frames. Because the Z shaped profile locks into a rebate, the section closes a gap while it adds rigidity, and the Z shaped profile is equally at home on shop fittings and on industrial equipment.
How this Z shaped profile is made
The billet is extruded, then the Z shaped profile is cut, punched, bent, decoiled and welded as the job requires, and finally the Z shaped profile is anodized in silver. Each Z shaped profile is checked against the drawing before it is packed, so the section you receive matches the section you approved.
How to choose this Z shaped profile
Start with the drawing, because the leg length and the wall of the Z shaped profile decide how much load the section carries. Then agree the alloy and the temper, because a Z shaped profile in a harder temper springs back less when it is formed. If you are unsure, send a sample and the Z shaped profile is matched to it.
What to confirm before you order this Z shaped profile
Confirm the section drawing, the alloy and the surface of the Z shaped profile. It is made in Jiangsu, China by brand Channel, certified to ISO9001, and sea freight is supported. Payment can be L/C, D/A, D/P, T/T, Western Union, MoneyGram or OA, and the Z shaped profile is offered with a customized logo, customized packaging and graphic customization from 5000 sets.
A short run and a long run are quoted the same way: send the drawing, say how many metres of the Z shaped profile you need, and the section is extruded to that figure.
Wall thickness, leg length and the alloy are agreed before the die is cut, so the Z shaped profile arrives ready to fit rather than ready to trim.
Panels, glazing beads and ladder racks are common homes for a Z shaped profile that has to sit flush against a flat face.
Because the section is symmetrical, one Z shaped profile can be turned over and used on the opposite side of a frame.
Small quantities are welcome, and every Z shaped profile leaves the works wrapped so that the anodized face is not scratched in transit.
Due to its fine finish and strength to weight ratio, it is ideal for architectural trim, door and window frames, furniture
components and trims, supporting boards or sheets to create a display area, safety and deck structures, athletic equipment,frames, racks etc.
Material & Temper | Aluminum Alloy 6063-T5,6061-T6 |
Surface Treatment | Anodizing, powder coating, electrophoresis, wood grain, polishing, brushing, sandblasting, etc. |
Colour | Silver |
Length | 0.2 meters to 14 meters, cut in custom’s order |
Minimum Wall Thickness | 0.4 mm |
Maximum Dimensions | Circumscribed Circle Diameter 300 mm |
Workability | Easy to Weld, Cut, and Machine |
Application | Framework, Supports Frame, Braces, Trailers, Truck Beds, Beams, Transverse Components |
Stock Sizes | Part of sizes are available in stock, please contact us to check |
Fabrication | Die designing→Die making →Smelting&alloying →QC→Extruding →Cutting → Heat Treatment→QC→Surface treatment→QC→Packing→ QC→Shipping→After Sale Service |
Deep Processing | Precision cutting/CNC / Punching / Checking / Tapping / Drilling /Milling |
Certification | ISO9001 |
Our company has two departments-technical & producing department and trade department. Specializing in titanium materials and stainless steel products research and development, production and marketing services. We mainly produce and provide standards based on international standards and China's high-quality titanium and stainless steel products---- titanium sheets, titanium rods, titanium tube, titanium wire, titanium foil, titanium standard parts and other non-standard parts titanium, stainless steel tubes, stainless steel wire and other stainless steel products. Company production factory is located in the suburbs, now has a staff of 200 people, plant area of 100000 square meters;Company sales in the export sector, zhangjiagang channel int'l co.,ltd in urban areas, the existing staff 10 to 20 people.We will continue to innovation, sincere communication with all partners, create the biggest value for customers, welcome to contact us.
A. Our company is an integrated set of industry and trade company.
Q. How to ensure the quality of your products?
A. IS09000, client requirements, product standards, strict inspection to control raw material, production process and final
products.
Q. How do you resolve the problem about your products?
A. Person of aging services: For customer complaints commissioner set up a special complaint handling, complaint issues recorded
the first time and find the relevant person in charge of the feedback and resolve. Details check our "Quality
corrective action report".
Q. What is the MOQ?
A. It depends, different products will be different Sample order is acceptable, and some samples can be free.
Q. How long do you need the delivery time?
1)Supply within 5 -10 days (If products are in our stock list).
2)Customized products need to be calculated according to the quantity.
Q.What 's your payment terms?
A. T/T, L/C at sight , Western Union.
Q.How can we get your price ?
A. We need below information to quote for you:
1. Product Name
2. Standard
3. Material Grade (Chemical Composition)
4. Dimension
5. Quantity
6. The Drawing for Special Parts