Anodised 6063 Threaded Aluminum Tube and Piping for Bike Frames and Tent Poles

What This Threaded Aluminum Tube Is

This product is an anodised aluminum tube and piping range made from 6063 alloy and supplied with thread-connected ends, so sections can be screwed together without separate couplers. Tube is produced by extrusion, cold drawing or cold rolling and is available in round, oval and square section with walls from 0.3 mm up to 50 mm. A tensile range of 160-205 MPa and the T3 to T8 tempers cover light decorative work through to more demanding frame parts, and dimensions are held to a ±1% tolerance. Anodising gives the surface a durable, uniform finish in silver, bronze, champagne, black or gold, and further colours can be produced to order.

Where It Is Used

Threaded tube of this type is used for bike frames, tent poles and other assemblies that need to join and separate on site. It also appears in furniture and display frames, curtain and rail systems, decorative trim, and light industrial piping where a clean metal line is wanted. Because the ends can be threaded to match an existing fitting, the same tube works as a replacement part as well as a new component. Applications are generally decorative and light structural, so the tube is chosen for stiffness, finish and the ability to join cleanly rather than for high-pressure duties.

How to Choose the Right Tube

Start from the joint: choose a diameter and thread that match the fittings or mating parts already in use, then set the wall thickness to suit the load and the weight you can accept. Thin walls keep bicycle and tent parts light, while heavier walls add stiffness for furniture and industrial frames. Select the alloy and temper against the forming you need, since 6063 anodises and threads cleanly while harder tempers hold more load. Decide the section shape and the finish early, because anodising colour and secondary operations such as cutting, threading and punching all affect the production schedule.

What to Confirm Before Ordering

Before ordering, confirm the alloy and temper, the outside diameter, the wall thickness and the thread specification for each end. State the section shape, the anodised colour and the length, and list the operations required such as cutting, threading or punching. Where the tube must screw into an existing part, send a sample or thread drawing so the fit is correct first time. This product is supplied to trade and OEM buyers, so custom sizes, colours and branding are quoted per enquiry along with the delivery schedule.