Anodized 6063/6061 Aluminum Tube 6mm 10mm 12mm for Furniture Making and Curtain Rods

What This Anodized Aluminum Tube Is

This aluminum tube is a hollow metal section produced from 6063 and 6061 alloy, supplied in 6 mm, 10 mm and 12 mm sizes with a minimum wall of 0.3 mm. The tube is formed by extrusion or drawing and can be finished in mill condition, anodized, polished or powder coated to suit the end product. A tensile range of 160-205 MPa and the T5 to T6 tempers give the section a balance of strength and workability, while wall and diameter tolerances are stated in the usual band for this tube family. Tube is made to order in round, oval or square section and in custom lengths.

Where It Is Used

Typical applications are furniture making and curtain rods, along with decorative frames, home and light industrial fittings, and small parts that need a clean metal finish. The alloy suits parts that will be bent, welded or punched after cutting, and an anodized surface stands up to everyday handling indoors. Because the tube is available in several diameters and wall thicknesses, it can serve as a visible frame member or as a hidden internal support. Bending, decoiling, welding and punching services are offered so the tube can arrive ready to assemble rather than as a plain length.

How to Choose the Right Tube

Begin with the load and span the part has to carry, then choose the diameter and wall that keep deflection within your limit. Smaller diameters such as 6 mm and 10 mm suit light frames, handles and decorative trim, while 12 mm and larger sections carry more load in curtain rods and furniture frames. Confirm the alloy and temper against the work you plan: 6063 accepts bending and anodizing easily, while 6061 is chosen when more strength is needed. Match the wall to the fixing method so threads and rivets hold, and pick the finish before production because anodizing, polishing and powder coating each add their own lead time.

What to Confirm Before Ordering

Before ordering, confirm the alloy and temper, the outside diameter and wall thickness, the cut length and the section shape. State the finish and colour, and list any secondary operations such as bending, welding, punching or threading that must be done before shipment. For furniture and curtain rod work, send a drawing or a sample of the fitting the tube must slide into so the tolerance and surface finish are right. This product is supplied to trade and OEM buyers, so custom dies, lengths and branding should be raised at the quotation stage.