Your Global Metal Tube Expert – One-Stop Cost-Effective Procurement.

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 1

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 2

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 3

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 4

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 5

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 6

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 7

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing

Anodized 6000 and 7000 series aluminium camping tent pole, round, 0.3 mm wall up to 6000 mm.

What this tent pole is

This tent pole is a round aluminium alloy tube made in 6000 and 7000 series, including 7001, and it is normally anodized so the surface keeps its colour outdoors. The tent pole is bent and welded to the drawing, and the ends can be shaped for the frame or the sleeve it has to fit.

Where this tent pole is used

Buyers use it for camping tents and shelters, tarp and awning supports, and frames where a light but stiff pole is needed. Because the tent pole is bent to shape rather than cut straight, one drawing can cover a complete pole set for a tent model.

How this tent pole is finished

The tube is drawn in round section with a wall from 0.3 mm, then anodized, powder coated or polished. Colours run through red, blue, black, gold, yellow and green, and the tent pole is cut to any length up to 6000 mm.

How to choose this tent pole

Start from the tent model, because the bend radius and the number of sections decide the length and the diameter of the pole. Then choose the alloy: 6000 series bends and anodizes easily, while 7000 series such as 7001 gives the higher strength that long unsupported spans need. Finally pick the colour and the finish, since the tent pole is normally anodized for outdoor use.

What to confirm before you order this tent pole

Confirm the alloy and temper, the outside diameter and wall, the length, the bend radius and the finish. Confirm as well whether the pole needs holes, slots, end caps or a shock cord, because those operations change the price and the lead time of the tent pole. Samples are available so the bend and the finish can be checked before production starts, and production is quoted at 22 to 30 days after the drawing is agreed.

Lead Time:

1-500(meters):30(days),>500(meters):To be negotiated(days)

Customization:

Customized logo (Min. Order: 1 sets),Customized packaging (Min. Order: 1 sets),Graphic customization (Min. Order: 1 sets)

Shipping:

Support Sea freight

Place of Origin:

China

Payments:

L/C,D/A,D/P,T/T,Western Union,MoneyGram,OA

Brand Name:

channel

Model Number:

Channel-TP

Inquiry

Write a Review

Name

Aluminum tent pole

Sample

Avaliable

Al (Min)

98.8%

Surface treatment

Anodizing, powder coating, polishing etc

Temper

T3~T8

Shape

Round

Processing Service

Bending, Decoiling, Welding, Punching, Cutting

Grade

6000 Series

Color

Red, blue, black, gold, yellow , green etc

Material

6000series, 7000series

Wall Thickness

>=0.3mm

Usage

Support, tent pole, frame

Length

<6000mm

Hardness

aluminium alloy tube

Delivery Time

22 ~ 30 days

Alloy Or Not

Is Alloy

Place of Origin

Jiangsu, China

Tolerance

±1%

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 8

Channel,a supplier specialized in the field for more than 12 years

As an experienced metal tube supplier, specialized in aluminum tubes, stainless steel tubes, titanium tubes and also can supply the whole production line for factory.

★★★ One is committed to the production of 6000 series and 7000 series aluminum tube, especially in the production of 7001, 7005, 7075 aluminum tent pole pipe and arrow tube has many advantages.
★★★ One is committed to the production of stainless steel seamless and welded pipe, especially in the production of various kinds of medical stainless steel capillary pipe.
★★★ One is committed to the production of GR1 GR2 GR9 titanium seamless tube, especially in the production of GR9 titanium seamless tube has the advantage of price and delivery time.

Products Description

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 9

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 10

Zhangjiagang Channel is a good manufacture and trade company specialized in aluminium tent poles, tent accessories. You can select different size of tent poles with high quality and reasonable price from us.

6000 series, 7000 sereies Aluminium pipes has the main feature: high weather resistance, anti scratch, anti corrosion, good weather resistance, subtle edges, elegant appearance, easy processing and installation, high brightness and hardness. So it can be
used as tent pole.

Product Paramenters

Material

Aluminum/Aluminium alloy 7001 7005 7075

Diameter

6.9mm

7.9mm

8.5mm

9mm

9.5mm

11mm

13mm

Wall thickness

0.75mm

0.9mm

1mm

Colour

red, yellow, blue, green, black, golden, grey, etc.

Material

Aluminum/Aluminium alloy 6061 6063

Diameter

16mm

18mm

19mm

20mm

22mm

25mm

33mm

Wall thickness

1mm

1.2mm

1.8mm

Colour

red, yellow, blue, green, black, golden, grey, etc.

Product Applications

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 11

Aluminum Tube Tents

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 12

Aluminum Water Pipe System

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 13

Aluminum Pipe Railing

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 14

Special Aluminum Pipe

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 15

Aluminum Tube Radiator

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 16

Shaped Aluminum Pipeline

Recommend Products

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 17

Aluminium Tube

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 18

Aluminium Tent Pole

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 19

Aluminium Telescoping Pole

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 20

Stainless Steel Tube

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 21

Stainless Steel Capillary Tube

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 22

Stainless Steel Sensor Tube

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 23

Titanium Tube

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 24

Titanium Plate

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 25

Titanium Bar

Product Packaging

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 26

Normal Package

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 27

Wooden Case Package

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 28

Carton Box Package

Manufacturing Technique

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 29

Aluminum (Aluminium) Tube/Pipe Production Process:

The alloy aluminum tube profile is mainly produced by the extrusion method, while the wire rod is produced by the stretching method. The most commonly used extrusion processes are forward extrusion and reverse extrusion. Extruded alloy aluminum pipes and profiles adopt the production process of ingot heating-extrusion-finishing; for heat-treated aluminum alloys that can be strengthened, quenching and aging treatment are also required. The aluminum alloy wire adopts the production process of hot extrusion-annealing-stretching-heat treatment-finishing. The aluminum wire for the conductor is mainly produced in the wire factory, and generally adopts the production process of first continuous casting and rolling to produce aluminum wire rod and then stretching.

Why Choose Us

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 30

Zhangjiagang channel int'l Co., Ltd.

Zhangjiagang channel int'l Co., Ltd is located the East of economically developed region--- Zhangjiagang city Jiangsu province.Our company has two departments-technical & producing department and trade department. Specializing in aluminum materials, titanium materials and stainless steel products research and development, production and marketing services.

Factory description.

Company production factory is located in the suburbs, now has a staff of 200 people, plant area of 100000 square meters; Company sales in the export sector, zhangjiagang channel int'l co.,ltd in urban areas, the existing staff 10 to 20 people.

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 31

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 32

Certificates

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 33

Exhibitions

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 34

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 35

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 36

7001 Aluminium Alloy Camping Tent Pole, Anodized and Bent to Your Drawing 37

FAQ

Q. Are you a factory or trading company?
A. We are a factory company.

Q. How to ensure the quality of your products?
A. ISO9000, client reqirements, product standards,strict inspection to control raw material,production process and final products

Q. How do you resolve the problem about your products?
A. Person of aging services: For customer complaints commissioner set up a special complaint handling,complaint issues recordedthe first time and find the relevant person in charge of the feedback and resolve. Details check our "Quality corrective action report"

Q. What is the MOQ?
A. Sample order is acceptable, And some samples can be free.

Q. How long do you need the delivery time?
1)Supply within 5-10days (product in our stock list)
2)Custom products need to be calculated according to the quantity

Q.What 's your payment terms?
A. T/T , L/C at sight , Western Union

Q.How can we get your price ?
A. We need below information to quote for you:
1. Product Name
2. Standard
3. Material Grade (Chemical Composition)
4. Dimension
5. Quantity
6. The Drawing for Special Parts

Get in touch with us

If you need more information about our company, please feel free to contact us. We are more than happy to manufacture top-of-the-line products for your project.