Clamps Irrigation Aluminum Pipe Bend
What this aluminum pipe bend is
It is a drawn aluminium tube formed into a bend, and the aluminum pipe bend is supplied in round, oval or square section. Wall runs from 0.3 mm to 50 mm, the aluminum pipe bend is held to a tolerance of plus or minus ten percent, and the alloy is available from the 1000 to the 7000 series. Because the aluminum pipe bend is drawn and then bent rather than cast, the wall stays even around the curve.
Where this aluminum pipe bend is used
Buyers order this aluminum pipe bend for irrigation lines and clamps, and the same aluminum pipe bend is used for bike frames, tent poles, decoration and industry. Because the aluminum pipe bend carries water round a corner without a joint, it suits irrigation runs and machine frames, and it can also be supplied for railings and supports.
How this aluminum pipe bend is made
The alloy is extruded and then drawn or rolled into tube, and the aluminum pipe bend is bent, cut, punched, decoiled or welded to the drawing. Because the aluminum pipe bend is formed after drawing, the bore stays round through the curve, and the aluminum pipe bend is finished in silver, bronze, champagne, black or golden, or to a colour you set. Aluminium content is 98.8% and the model Channel-Alu-042 covers the standard sizes.
How to choose this aluminum pipe bend
Start with the run, because the bend angle and the radius decide how the aluminum pipe bend fits the corner it has to turn. Then fix the outside diameter and the wall together, since a thicker wall makes the aluminum pipe bend stiffer under pressure, and choose the alloy and the temper. Finally agree the finish and the length, because the drawing you send sets the quote.
What to confirm before you order this aluminum pipe bend
Confirm the alloy, the outside diameter and wall, the bend angle and radius, the length and the finish. Confirm as well whether the aluminum pipe bend needs a clamp, a threaded end or a welded joint, because those operations change the price and the lead time of the aluminum pipe bend. Standards can follow GB/T 5237, EN12020-1.2, ASTM B85-96 or JIS H5302, ISO and other certification is recorded, and sea freight is supported for the aluminum pipe bend.
|
Model
|
Aluminum/Aluminium lube/Pipe
|
|
Material Grade
|
1000 series: 1050,1060,1070,1080,1100,1435, etc.
2000 series: 2011, 2014,2017,2024, etc.
3000 series: 3002,3003,3104,3204,3030 , etc.
5000 series: 5005,5025,5040,5056,5083, etc.
6000 series:6101,6003,6061,6063,6020,6201,6262,6082, etc.
7000 series: 7003,7005,7050,7075, etc.
|
|
Size
|
Outer Diameter:3-250mm
Wall Thickness: 0.3-50mm
Length: 10mm-6000mm
|
|
Standards
|
ASTM,ASME,EN ,JIS, DIN,GB/T , etc.
|
|
Surface treatment
|
Mill finished , anodized , powder coating, Sand blast, etc.
|
|
Surface colors
|
Nature, silver, bronze, champagne, black, golden, etc.
As customized
|
|
Status
|
Nature, silver, bronze, champagne, black, golden, etc.
As customized
|
|
Usage
|
Aluminum profile for windows/doors/decoration/construction/curtain wall
|
|
Quality
|
China Nation Standard GBT
|
|
Packing
|
Protective film+plastic film or EPE+kraft paper
|
|
Certificate
|
ISO 9001 2008
|
|
MOQ
|
1 tons.Usually 12 tons for a 20 feet container; 24 tons for a 40 feet container
|
|
Press Machine
|
500-4000 tons all together 64 press lines
|
|
Moulding
|
1.Using our moulds, no fee;
2.Using customer drawing , opening mould , usually about 5 tons the moulding fee is free;
3.Can be discussed.
|