1) 7000 series flexible tent poles, the length and sections can be customized.
2) 7000 series prebend tent poles. The bend degree and length can be customized.
3) Customized tent poles and accessories are acceptable.
What this aluminium pole is
It is a seamless tube drawn in 6000 or 7000 series alloy and anodized, and the aluminium pole is supplied in an 11 mm round section. The aluminium pole runs from 0.7 mm to 1.2 mm in wall, is held to a tolerance of plus or minus ten percent, and is supplied in T3 to T8 temper. Because the aluminium pole is drawn seamless, there is no seam along the bore.
Where this aluminium pole is used
Buyers order this aluminium pole for camping and hiking tents, and the same pole is used for outdoor doors, sports frames and shelter poles. Because the aluminium pole is collapsible and telescopic, it packs down short while still reaching the height the shelter needs, and it can also be supplied for tarp and awning frames.
How this aluminium pole is made
The alloy is drawn into a seamless tube, then cut, bent, punched, decoiled or welded, and the aluminium pole is anodized in silver, bronze, champagne, grey or golden. Because the aluminium pole is machined after drawing, the joints land where the drawing puts them, and the aluminium pole is supplied in the length the order asks for.
How to choose this aluminium pole
Start with the shelter, because the diameter and the number of sections decide how the aluminium pole behaves in wind. Then choose the wall, since a thicker wall makes the aluminium pole stiffer, and choose the temper and the colour. Finally agree the length and the joint, because the aluminium pole is made to the drawing you send.
What to confirm before you order this aluminium pole
Confirm the alloy and temper, the diameter and wall, the number of sections, the colour and the length. Confirm as well whether the aluminium pole needs a ferrule, a shock cord, an end cap or a clip button, because those operations change the price and the lead time of the aluminium pole. ISO9001:2015 is recorded for this aluminium pole, the standard can follow DIN, EN, ASTM, JIS or GB/T, and sea freight is supported.
|
Material
|
Aluminum/Aluminium alloy 7001 7005 7075
|
||||||||||||
|
Diameter
|
6.9mm
|
7.9mm
|
8.5mm
|
9mm
|
9.5mm
|
11mm
|
13mm
|
||||||
|
Wall thickness
|
0.75mm
|
0.75mm
|
0.75mm
|
0.75mm
|
0.75mm
|
0.9mm
|
1mm
|
||||||
|
Colour
|
red, yellow, blue, green, black, golden, grey, etc.
|
||||||||||||
|
Material
|
Aluminum/Aluminium alloy 6061 6063
|
||||||||||||
|
Diameter
|
16mm
|
18mm
|
19mm
|
20mm
|
22mm
|
25mm
|
33mm
|
||||||
|
Wall thickness
|
1mm
|
1mm
|
1mm
|
1mm
|
1.2mm
|
1.2mm
|
1.8mm
|
||||||
|
Colour
|
red, yellow, blue, green, black, golden, grey, etc.
|
||||||||||||