Color Anodized Tent Pole 8.5mm Pre Bending Aluminum Tent Pole
What this anodized pole is
It is a drawn aluminium alloy pole supplied at an 8.5 mm diameter, and the anodized pole is bent before it is finished so the curve holds its colour. Because the anodized pole is bent rather than welded into shape, the wall stays even around the curve.
Where this anodized pole is used
Buyers order this anodized pole for tent frames, tarp supports and awning frames, and the same pole is used in decoration, industry and support work. Because the anodized pole is supplied in the colour the order sets, a frame can be finished to one palette.
How this anodized pole is made
The alloy is drawn into tube, bent to the drawing, then cut, punched, decoiled or welded, and the anodized pole is finished in an anodized, polished or powder coated surface. The model CHJQ-ALUP covers the standard sizes, and the tensile runs from 160 to 205 Rm/Mpa.
How to choose this anodized pole
Start with the frame, because the diameter and the wall together decide what the anodized pole can carry. Then choose the grade and the temper, and finally agree the colour, the surface and the length, because the pole is made to the drawing you send.
What to confirm before you order this anodized pole
Confirm the diameter and wall, the bend angle, the length, the temper and the colour. Confirm as well whether the anodized pole needs a ferrule, an end cap or a drilled hole, because those operations change the price and the lead time. The standard can follow GB/T 5237, EN12020-1.2, ASTM B85-96 or JIS H5302, and sea freight is supported.