Folding Outdoor Tent Pole Aluminium Camping Tent Pole

Folding Outdoor Tent Pole in Aluminium for Camping

This folding outdoor tent pole is made from aluminium tube sections that join end to end to form the frame of a camping tent. Because the pole folds down into a short bundle, it can be packed with the tent and carried to a campsite, then straightened and fed through the tent sleeve or clipped to the tent when the shelter is pitched.

How the Folding Pole Is Made Up

• Aluminium tube sections cut to the length needed for each pole run
• Joint pieces or ferrules so one section slots into the next
• End tips that seat into the tent sleeve or eyelet
• A connecting line that keeps the sections together as one folding run
• Sections that pack into a short bundle for carrying and storage

How the Pole Folds and Opens

When the tent is taken down, the sections of the folding pole are parted at the joints and the run collapses into a compact bundle. To pitch the tent again, the sections are joined one by one until the run is straight, and the end tips are seated in the tent sleeve or eyelet. Keeping the sections joined as one run means the pole can be handled as a single piece rather than a loose set of tubes.

Use as a Replacement Tent Pole

The pole is supplied for outdoor camping tents and can be used as a replacement tent pole when a pole has been bent, cracked or lost, which keeps a tent in service without replacing the whole tent. It can also be kept as a spare for trips where a damaged pole would otherwise end the use of the tent. Because it arrives as a folding aluminium pole, it can be fed through the pole sleeve and the end tips seated in the same way as the original pole.

Aluminium as the Pole Material

The tube is made from aluminium, which keeps the pole light to carry while still holding its shape under the load of a pitched tent. Aluminium does not contain iron, so it does not rust in the way a steel pole does. The sections are joined so that the pole folds and opens without tools, which keeps pitching and packing simple at the campsite.

Pitching, Folding and Storage

To pitch a tent, the folding pole is opened section by section until the joints seat, then the run is pushed through the tent sleeve or clipped to the tent until the end tips locate. To take the tent down, the pole is parted at each joint and folded back into its bundle. After use, wipe the pole dry before it is stored with the tent so that grit and moisture are not carried into the next trip.

Ordering Notes

Each pole is supplied as a folding aluminium tent pole for outdoor camping use. Please confirm the length, the number of sections and the end fitting needed for your tent before ordering, and the sales team will confirm the available range.