This item is supplied as an aluminium alloy tube. Alloy Or Not: Is Alloy, so the section comes from alloy material rather than a plain non-alloy metal. Choosing an alloy tube gives buyers a light, workable part that is easy to handle, cut and fit during their own assembly, framing or general fitting work. Because it is formed from alloy stock, the tube holds a steady section along its length and can be moved, stacked and stored without special handling.
The tube is a straightforward metal section. Buyers who work with light alloy often pick a tube of this kind for frames, supports and general build work where a firm but light part is wanted. It is light in the hand, so a run of pieces can be carried and positioned by one person, and the even wall gives a tidy, uniform look along a whole span. No special tools are needed for ordinary cutting and fitting; an ordinary workshop saw, drill and file are enough to prepare a piece.
Length: under 6000 mm. Because pieces are supplied in lengths of less than six metres, the tube can be handled, moved and stacked by hand. A known maximum length is useful when planning cuts: a buyer can work out how many shorter pieces can be taken from one length and keep waste low. Matching lengths also make counting, banding and storing a run of tubes simple, since every piece in a batch is easy to line up and compare.
Cutting an alloy tube down to a shorter working piece is a straightforward bench job. A fine-tooth blade leaves a clean edge, and the cut face can be dressed with a file so the piece sits flat against the next part. Light alloy is easy to clamp, so small parts stay steady while they are drilled or joined. The same fixing method can be repeated at several points along a run without laying the work out again each time.
Aluminium alloy tube is light to carry and easy to position, which helps when parts have to be measured, marked and fixed by hand. The straight section stacks neatly, so a batch can be banded together and stored on a rack or floor without a special support. Keeping pieces of the same length together makes it easy to see how much stock is left and to pick the next piece when work resumes.
When a project calls for a light metal section, an alloy tube of this kind is a practical pick. The alloy route gives a workable part that keeps its shape through ordinary storage, transport and assembly while staying light enough to move by hand. Buyers can order the length they need and cut each piece to the size their own work requires.
Model | Alumin(i)um Tube/Alumin(i)um Pipe. |
Surface treatment | Mill finish |
Material | 6063 6061 6060 and different aluminium alloy |
usage | aluminum profile for windows/ doors/ decoration/ construction/ curtain wall |
Quality | China Nation Standard GB/T |
Status | T4 T5 T6 or other special status |
Packing | Protective film +plastic film or EPE +kraft paper |
Certificate | ISO 9001 2008 |
MOQ | 1 tons. Usuall 12 tons for a 20 feet contaner; 24 tons for a 40 feet container. |
Length | Podwer coating 6.5meters, anodizing 6.5 meters, mill finish 12 meters |
Press Machine | 500-4000 tons all together 64 press lines |
Moulding | 1. Using our moulds, no fee; 2. Using customer drawing, opening mould, usually about 5 tons the moulding fee is free; 3. Can be diguessed. |
