Aluminum Product
Our aluminum product portfolio delivers high-performance solutions for construction, machinery, lighting, automotive, HVAC, and daily applications. Key offerings include precision-extruded LED aluminum profiles with superior heat dissipation, structural support, and decorative performance; lightweight, corrosion-resistant aluminum alloy tubes, telescopic tubes, and poles with flexible length adjustment; high-precision aluminum plates/sheets for industrial and architectural use; and aluminum fin tubes with enhanced heat transfer efficiency. All products feature premium alloys, durable surface treatments, high strength, smooth finishes, excellent weatherability, and easy processing. Customization in shape, length, and dimensions is supported to meet diverse project demands, ensuring reliable performance across commercial, industrial, and household scenarios.
Send your inquiry
This marine grade tubing is drawn seamless from 5052 aluminium, and the marine grade tubing is supplied for boat, yacht, offshore railing and handrail work. The marine grade tubing is held to a tolerance of plus or minus one percent, then finished mill finish, anodized, polished or powder coated. Hardness is recorded at 160-205 Rm/Mpa, and the wall of the marine grade tubing runs from 0.3 mm to 50 mm.
This aluminum curtain rod is extruded in 6061 or 6063 alloy from the 6000 series, and the aluminum curtain rod is finished with a wooden powder coating over a silver, gray or black base. The aluminum curtain rod is held to a tolerance of plus or minus one percent in T3 to T8 temper, and the aluminum curtain rod is supplied in T-profile, round, flat or angle section. ISO9001:2008 is recorded.
This shock absorption cylinder is drawn from 6063 T6 aluminium alloy, and the shock absorption cylinder is supplied in an oval, round or square section with a wall of 0.3 mm to 15 mm. Each shock absorption cylinder is colour anodized in silver, red, yellow or green, and the shock absorption cylinder is held to a tolerance of plus or minus ten percent in T3 to T8 temper. Hardness is recorded at 35-130HB and the aluminium content is 98.8%.
This t-slot profile is extruded in 6063 aluminium alloy from the 6000 series, and the t-slot profile is supplied in a square 40x40 mm section with two opposite open T-slots. The t-slot profile is held to a tolerance of plus or minus one percent in T3 to T8 temper, and the t-slot profile is anodized in silver or black. ISO9001 is recorded.
This heat exchanger finned tube is made for heat exchange work, and the heat exchanger finned tube is supplied in a round shape with a recorded length of 12 m. The heat exchanger finned tube holds a tolerance of plus or minus ten percent, and the heat exchanger finned tube is cold rolled and black painted or left slightly oiled. ISO 9001 is recorded and the standard can follow ASTM.
This aluminum hollow tube is extruded in 7075 or 6061 T6 alloy, and the aluminum hollow tube is supplied in a round, oval, square or irregular section with a wall of 0.2 mm to 20 mm. The aluminum hollow tube is held to a tolerance of plus or minus ten percent in T3 to T8 temper, and the aluminum hollow tube is finished mill finished, anodized or powder coated. ISO is recorded and the aluminium content is 96%.
This extruded round tube is drawn in 6061, 6063, 7001 or 7075 aluminium alloy, and the extruded round tube is supplied in a round, oval, square or irregular section with a wall of 0.2 mm to 20 mm. The extruded round tube is held to a tolerance of plus or minus ten percent in T3 to T8 temper, and the extruded round tube is finished mill finished, anodized or powder coated. ISO is recorded and the aluminium content is 96%.
This thin wall tubing is extruded in 2024, 5083, 6061, 6063 or 7075 aluminium alloy, and the thin wall tubing is supplied in a thin wall from 0.1 mm to 50 mm. The thin wall tubing is held to a tolerance of plus or minus ten percent in T3 to T8 temper, and the thin wall tubing is finished anodized, polished, powder coated or mill finished. ISO and CE are recorded.
A telescopic pole is only as good as its tube and joints. These sections are made from seamless alloy 6061 aluminium tube, cut, welded and finished to the length, colour and surface a project calls for, and then fitted with the lock style that suits the job. Compare clamp, twist and clip-button telescopic pole joints below, and tell us the extension, section count and finish you need so the tube can be made to your drawing.
This roller blind tube is extruded in 6061, 6063 or 6005 aluminium alloy, and the roller blind tube is supplied in a round, oval, square or irregular section with a wall of 0.2 mm to 20 mm. The roller blind tube is held to a tolerance of plus or minus ten percent in T3 to T8 temper, and the roller blind tube is finished mill finished, anodized or powder coated in a colourful anodized colour. ISO is recorded and the aluminium content is 96%.
A ready-to-use set of gold anodized aluminum tarp poles with sliding sections, ferrule joints and an elastic shock cord, finished with tapered metal tips. Lightweight, quick to pitch and quick to pack down, the set is made for camping tarps, porch shelters, sun shades and repair or replacement use, and can be built to an agreed length, colour and packing for OEM orders.
This cold drawn round tube is drawn in 6063 or 7075 aluminium alloy, and the cold drawn round tube is supplied in a round, oval, square or irregular section with a wall of 0.2 mm to 20 mm. The cold drawn round tube is held to a tolerance of plus or minus ten percent in T3 to T8 temper, and the cold drawn round tube is finished mill finished, anodized or powder coated. ISO is recorded and the aluminium content is 96%.
Copyright © 2026 Zhangjiagang channel int'l Co., ltd | Privacy PolicySitemap