Aluminum Product
Our aluminum product portfolio delivers high-performance solutions for construction, machinery, lighting, automotive, HVAC, and daily applications. Key offerings include precision-extruded LED aluminum profiles with superior heat dissipation, structural support, and decorative performance; lightweight, corrosion-resistant aluminum alloy tubes, telescopic tubes, and poles with flexible length adjustment; high-precision aluminum plates/sheets for industrial and architectural use; and aluminum fin tubes with enhanced heat transfer efficiency. All products feature premium alloys, durable surface treatments, high strength, smooth finishes, excellent weatherability, and easy processing. Customization in shape, length, and dimensions is supported to meet diverse project demands, ensuring reliable performance across commercial, industrial, and household scenarios.
Send your inquiry
This tent peg is pressed from aluminium alloy and made 18 cm long with a 6 mm shank, so it bites into ground that a thin peg would slip out of. The tent peg is finished in black, red, yellow or another colour, and each tent peg weighs 0.014 kg. A customized logo can be added, the pegs are packed in OPP bags, and they suit camping in all seasons.
This aluminum elbow is drawn in 1000 to 7000 series alloy with a wall of 0.3 mm to 50 mm, and it is bent so the run turns without a joint. The aluminum elbow is held to a tolerance of plus or minus ten percent in T3 to T8 temper, the aluminium content is 98.8%, and each aluminum elbow is cut to the customized length the order asks for. It is available in round, oval or square section.
This wind chime tube is drawn in aluminium alloy from the 6000 or 7000 series, with a tolerance of plus or minus one percent. The wind chime tube is supplied in a round section, and each wind chime tube is finished in an anodized, polished or powder coated surface, with the colour and the length set by the order. The aluminium content is 90%, and the tube can be bent, punched, welded or cut.
This tube fabrication starts from 6063 alloy in the 1000 to 7000 series, with a tolerance of plus or minus one percent and a wall of 0.3 mm to 50 mm. The tube fabrication covers bending, decoiling, welding, punching and cutting, and each tube fabrication is held in T3 to T8 temper with the surface mill finished, anodized, polished or powder coated. The aluminium content is 98.8%.
This anodized pole is drawn in 1000 to 7000 series alloy at an 8.5 mm diameter, with a wall of 0.3 mm to 50 mm. The anodized pole is bent to the drawing before it is finished, and each anodized pole is held to a tolerance of plus or minus one percent in T3 to T8 temper. The anodized pole is supplied in silver, bronze, champagne, black or golden, the aluminium content is 98.8%, and the sections run through round, oval and square.
This wood grain extrusion is drawn from aluminium alloy in the 6000 or 7000 series, with a wall of 0.2 mm to 20 mm and lengths from 1 m to 12 m. The wood grain extrusion is finished mill finished, anodized or powder coated to a colourful wood effect, and each wood grain extrusion holds a tolerance of plus or minus ten percent in T3 to T8 temper. ISO certification is recorded for the wood grain extrusion, and the aluminium content is 96%.
This aluminum pipe is extruded from aluminium alloy in the 3000 to 7000 series, with a wall of 0.3 mm to 15 mm and a tolerance of plus or minus ten percent. The aluminum pipe is supplied in oval, round or square section, and the aluminum pipe is finished anodized, mill finished, polished, powder coated or sand blasted in silver, red, yellow or green. Each aluminum pipe is held in T3 to T8 temper with a hardness of 35 to 130 HB, the aluminium content is 98.8%, and ISO and CE certification is recorded.
This carbon fiber pole pairs an aluminium core with a carbon fiber outer, and the carbon fiber pole is supplied in a round section with a 0.7 mm to 2 mm wall. Each pole carries a twist lock, so the sections hold where they are set, and the carbon fiber pole is anodized in red, green or grey or to your order. The aluminium content is 96%, the carbon fiber pole is held to a tolerance of plus or minus ten percent in T3 to T8 temper, and ISO9001 is recorded.
This camping pole is drawn from 6063, 6061, 7001 or 7075 alloy, and the camping pole is supplied in a round section with a wall of 0.75 mm to 1.5 mm. The camping pole is colorful anodized in red, yellow, grey, green or black, and each camping pole is held to a tolerance of plus or minus ten percent in T3 to T8 temper. The aluminium content is 96%, hardness runs above 140, and ISO9001 is recorded.
This windchime pipe is drawn in aluminium alloy from the 1000 to the 7000 series, and the windchime pipe is supplied in a round, oval or square section with a wall of 0.3 mm to 50 mm. Each windchime pipe is bent so it can be hung as a curve, and the windchime pipe is held to a tolerance of plus or minus ten percent in T3 to T8 temper. The aluminium content is 98.8%, the tensile runs from 160 to 205 Rm/Mpa, and ISO certification is recorded.
This tent extension pole is drawn in 7075 aluminum material, and the tent extension pole is supplied in a round, oval or square section. Each tent extension pole is held to a tolerance of plus or minus ten percent in T3 to T8 temper. The aluminium content is 98.8%, hardness runs 160 to 205 Rm/Mpa, and the tent extension pole is finished in mill finish, anodized, polished or powder coated colour.
This tent pole connector is made from aluminium alloy 6063, 7001 or 7075 in the 7000 series, and the tent pole connector is supplied in a round section with a wall of 0.8 mm to 5.0 mm. Each tent pole connector is held to a tolerance of plus or minus ten percent in T3 to T8 temper, and the tent pole connector is finished mill finished, anodized, powder coated, brushed, polished or sand blasted. Hardness is recorded at 8-12HW and the aluminium content at 97%.
Copyright © 2026 Zhangjiagang channel int'l Co., ltd | Privacy PolicySitemap