Wind Chimes - Silver Anodized Aluminum Wind Chime Tubing
Silver anodized aluminum wind chime tubing is a lightweight aluminium tube intended for wind chimes and similar decorative hanging pieces. The tube is finished with an anodized surface that gives it a clean, even silver appearance, so the visible rods of a chime present a consistent metallic look rather than the plainer surface of untreated aluminium.
Wind chimes depend on a set of straight, evenly formed tubes suspended so that they can swing and strike one another. A round aluminium tube suits this role because it is light enough to move with the air, stays straight along its length, and can be cut to the different lengths that give a chime its range of notes. The smooth anodized finish also keeps the surface looking tidy as the chime is handled and hung.
Beyond musical wind chimes, this decorative tubing can be used for other hanging and display pieces where a slim silver tube is wanted, such as mobiles, garden ornaments, curtain and window decorations, and craft or gift items. The material is easy to work with, so lengths can be cut, drilled and hung using ordinary hand tools, and the light weight keeps finished pieces easy to suspend.
Aluminium is a practical choice for objects that stay outdoors or in a window, because it is light and does not rust in the way that iron does. The anodized layer is formed on the surface of the metal and gives the tube its silver tone, so the appearance is part of the material rather than a coating that flakes away.
When building a chime or decorative piece, the main choices are the outside diameter and wall of the tube, the length of each segment, and the drilling or hanging points needed to suspend the pieces. Supplied as straight silver anodized tube, the material can be cut into a matched set of lengths and assembled into the finished hanging object with the cord, striker and top piece chosen for the design.
Because a chime is tuned by the lengths of its tubes, the same stock material can be cut into a set of graduated pieces that hang together as one instrument. The silver anodized finish means each piece keeps the same appearance as the set is assembled, and the tubes can be grouped, spaced and suspended according to the sound and look the maker wants.
For decorative work away from chimes, the tubing can be used wherever a slim, silver, straight aluminium element is required, such as in garden and patio ornaments, hanging mobiles, and seasonal or craft pieces. Its light weight and clean finish make it a convenient material to keep on hand for small hanging projects that need a bright metal accent.
twist lock aluminum telescopic pole for fruit collection
aluminium main feature:
High weather resistance anti scratch anticorrosion and good weather resistance subtle edges and elegant appearance and easy processing and installation high brightness and hardness. So it is widely used in aluminum window, door, curtain wall, hand railing, normal aluminum profile, decorative and industrial aluminum profile etc.
Detail Description:
|
Item |
Aluminium pipe/pipes Aluminium Tube/Tubes/tubing |
|
Material |
Aluminium |
|
Grade |
1000 series: 1050,1060,1070,1080,1100,1435, etc 2000 series: 2011,2014,2017,2024, etc 3000 series: 3002,3003,3104,3204,3030, etc 5000 series: 5005,5025,5040,5056,5083, etc 6000 series: 6101,6003,6061,6063,6020,6201,6262,6082, etc 7000 series: 7003,7005,7050,7075, etc |
|
standards |
ASTM, ASME,EN, JIS, DIN,GB/T etc |
|
Size |
Outer Diameter:3-250mm |
|
Wall Thickness: 0.3-50mm |
|
|
Length: 10mm -6000mm |
|
|
Surface treatment |
Mill finish Anodized Electrophoresis Powder coating Wooden grain Sand blast |
|
Surface colors |
Nature, silver, bronze, champagne, black, gloden, etc As customized |
|
Temper |
T3-T8 |
|
Moulding/Pattern
|
|
|
Application
|
1. Lighting,solar reflector plate. 2.architectural appearance, interior decoration:ceiling,metope, furniture,cabinets and so on. 3.elevator,nameplate, bags. 4.automotive interior and exterior decoration. 5. Interior decoration: such as photo frame. 6.household appliances, refrigerator, microwave oven, audio equipment. 7. Aerospace aspects. 8, machinery parts processing, mold manufacturing . 9. chemical/insulation pipeline coating. |
Chemical Composition:
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Zr |
Impurity |
Al |
|
2014 |
0.5-1.2 |
0.7 |
3.9-5.0 |
0.4-1.2 |
0.2-0.8 |
0.1 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
2017 |
0.2-0.8 |
0.7 |
3.5-4.5 |
0.4-1.0 |
0.4-0.8 |
0.1 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
2024 |
0.5 |
0.5 |
3.8-4.9 |
0.3-0.9 |
1.2-1.8 |
0.1 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
5052 |
0.25 |
0.4 |
0.1 |
0.1 |
2.2-2.8 |
0.15-0.35 |
0.1 |
- |
- |
0.15 |
Rest |
|
5056 |
0.3 |
0.4 |
0.1 |
0.05-0.20 |
4.5-5.6 |
0.05-0.20 |
0.1 |
- |
- |
0.15 |
Rest |
|
5083 |
0.4 |
0.4 |
0.1 |
0.40-1.0 |
4.0-4.9 |
0.05-0.25 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
5754 |
0.4 |
0.4 |
0.1 |
0.5 |
2.6-3.6 |
0.3 |
0.2 |
0.15 |
- |
0.15 |
Rest |
|
6061 |
0.4-0.8 |
0.70 |
0.15-0.40 |
0.15 |
0.8-1.2 |
0.04-0.35 |
0.25 |
0.15 |
- |
0.15 |
Rest |
|
6063 |
0.2-0.6 |
0.35 |
0.1 |
0.1 |
0.45-0.9 |
0.1 |
0.1 |
0.1 |
- |
0.15 |
Rest |
|
6082 |
0.7-1.3 |
0.5 |
0.1 |
0.4-1.0 |
0.6-1.2 |
0.25 |
0.2 |
0.1 |
- |
0.15 |
Rest |
|
7050 |
0.12 |
0.15 |
2.0-2.6 |
0.1 |
1.9-2.6 |
0.04 |
5.7-6.7 |
0.06 |
0.08-0.15 |
0.15 |
Rest |
|
7075 |
0.4 |
0.5 |
1.2-2.0 |
0.3 |
2.1-2.9 |
0.18-0.28 |
5.1-6.1 |
0.2 |
- |
0.15 |
Rest |
Production Flow
Q. Are you a factory or trading company?
We are a factory company.
Q. How to ensure the quality of your products?
ISO9000, client reqirements, product standards,strict inspection to control raw material,production process and final products
Q. How do you resolve the problem about your products?
Person of aging services: For customer complaints commissioner set up a special complaint handling,complaint issues recorded the first time and find the relevant person in charge of the feedback and resolve. Details check our "Quality corrective action report"
Q. What is the MOQ?
A. Sample order is acceptable, And some samples can be free.
Q. How long do you need the delivery time?
1)Supply within 5-10days (product in our stock list)
2)Custom products need to be calculated according to the quantity
Q.What 's your payment terms?
T/T , L/C at sight , Western Union
Q.How can we get your price ?
We need below information to quote for you:
1. Product Name
2. Standard
3. Material Grade (Chemical Composition)
4. Dimension
5. Quantity
6. The Drawing for Special Parts