This internally threaded aluminum tube is an aluminium pipe with machined internal threads at one or both ends, so sections can be screwed together into a connected assembly. It is used for frames, rails, supports and general fabrication where a threaded joint is needed instead of welding, allowing parts to be assembled, adjusted or replaced on site.

6063-T5 anodized aluminum tube produced by hot extrusion and supplied as a hollow profile for conveyor production line frame systems, tent and structure frames, and general industrial framing where a clean, corrosion-resistant finish and a consistent cross-section are required.

6063-T5 extruded aluminum tee profile supplied in a T-shaped section for tent frame joints, trusses and structural framing, giving a straight, rigid edge that accepts standard brackets, bolts and welding in general fabrication work.

Customized 7001 aluminum tent pole produced to order for camping tents and tent frame structures, using a lightweight high-strength aluminium alloy and made to the length, taper and fitting detail required by the frame.

Custom heavy duty aluminum telescopic pole supplied with a twist-locking joint, giving an extendable section that can be locked at the required length for tent frame systems and adjustable support structures.

Aluminum tent nail pegs and stakes supplied with hook pin ends for driving into soil and holding camping tent guy lines, groundsheets and light shelters. The pegs are made from aluminium, so a full set stays light in the pack, and the hook pin head keeps a guy line captive once the stake is set. Straight shank nail pegs like these suit grass, soil and soft ground on camping and outdoor pitches.

An aluminum telescopic pole is a set of round aluminium tube sections that slide inside one another. The inner section carries a spring button and the outer section is drilled with a row of holes along its length. Pull the pole out and the button springs through the nearest hole, so the pole locks at that length without a clamp or a tool. Press the button in and the pole slides again, which is what lets one telescopic pole cover a range of working lengths and still pack down short. The poles are supplied in aluminium alloy round tube, with the finish and colour agreed for the order, and with the length, number of sections, tube diameter and wall and any printed mark following the buyer's own drawing. Poles like this are used as tent and tarp uprights, awning and shelter supports, sign and banner poles and adjustable handles on cleaning and garden tools. Tell us what the pole has to hold up and how it will be packed, and we will confirm the tube that fits your order.

Extruded aluminum profiles for window and door systems, supplied as frame sections for fabricating aluminium windows, doors and glazed openings. The sections carry glass, hold hinges and locks, and take glazing beads or gaskets in the same geometry, so a whole window or door run can be cut from one extrusion. Because the cross-section stays constant along the bar, frames can be mitred, jointed and assembled without re-setting the machine for every piece.

4080 aluminum profile is a rectangular metric T-slot extrusion from the 40 series, used to build machine frames, guards, workbenches and modular structures. Slots run along each face so T-nuts, brackets and panel strips can be fixed anywhere on the bar without machining, and the section can be cut to length and re-assembled as the frame layout changes. The rectangular 40 by 80 proportion gives a stiff beam for long spans while keeping the slots of the 40 series compatible with the same fittings.

Aluminum profile for PVC stretch ceiling film is the extruded track that is fixed around the edge of a room and then grips the stretched film under tension. The profile combines a fixing flange, which takes screws or anchors into the wall or ceiling, with a clamping detail where the PVC film is captured by a harp or wedge. Because the profile is extruded to a constant section, the film edge can be held evenly along the whole perimeter, which is what gives a stretched ceiling its flat, seamless finish.

Made from extruded 6000 and 7000 series aluminium alloy, this custom tube is bent and welded to order and given an anodized finish that helps resist scratches and corrosion. The finished section is supplied for tube frames such as tent poles and pipe railings, in a range of outer diameters and wall thicknesses.

This high precision aluminum tube is extruded in 6063 or 7075 alloy and then bent and welded to the drawing. It is finished with an anodized or powder coated surface that helps resist scratches and corrosion, and is supplied in custom lengths for window, door, decoration and curtain wall framing.